Log in or sign up

Loading your account…

A calculator beside an open notebook with an abstract bar chart drawn in colored pencil on a wooden desk

For investors

ADR and RevPAR for Vacation Rentals, Explained

What ADR and RevPAR mean for a vacation rental, how to calculate each, and why revenue per available night tells you more than occupancy alone.

Category

For investors

Written by

The JekkyStay team

Published

· 7 min read

Quick answer

ADR (average daily rate) is rental revenue divided by booked nights, and RevPAR (revenue per available night) is rental revenue divided by the nights the home was open to book. RevPAR equals ADR times occupancy, which is why it is the better single measure of how a vacation rental is performing.

This guide covers the two definitions, how to calculate them, and how to use them when you compare homes. For building a revenue estimate, see how to estimate short-term rental revenue; for what counts as a good occupancy rate, see our occupancy guide.

Key takeaways

  • ADR (average daily rate) is rental revenue divided by booked nights: what guests paid, on average, for each night they stayed.
  • RevPAR (revenue per available rental night) is rental revenue divided by available nights, which equals ADR times occupancy.
  • RevPAR beats occupancy alone because it rewards the right balance of rate and nights, not a full calendar at a low price.
  • Define the inputs before you compare: whether cleaning fees count, whether blocked nights count as available, and which fees come out.
  • Compare RevPAR only across similar homes and the same months; a 3-bedroom and a 7-bedroom home, or July and January, are not like for like.
In this guide
  1. ADR: what guests paid per booked night
  2. RevPAR: revenue per night you had to sell
  3. A worked example
  4. Why RevPAR beats occupancy alone
  5. Get the definitions straight before you compare
  6. How investors use ADR and RevPAR
  7. The bottom line

ADR: what guests paid per booked night

ADR is the average rent you collected for each night a guest actually stayed.

The formula is simple:

ADR = rental revenue ÷ booked nights

AirDNA, one of the main short-term rental data providers, defines ADR as "the average revenue earned per booked night over the past 12 months." Its help center says its figures "include the cleaning fee set by the host" but "do not include Airbnb service fees." AirDNA describes listing revenue as "the sum of nightly rates, cleaning fees, minus service fees and discounts."

Three points follow from that definition:

  • ADR is not your listed price. Weekly discounts, last-minute cuts and promotions pull the paid rate below the asking rate.
  • ADR only looks at booked nights. Empty nights do not lower it, which is why a high ADR can hide a weak calendar.
  • The cleaning fee question matters. If one source includes cleaning fees and another does not, their ADRs are not comparable. A home with short stays collects more cleaning fees per night, so including them raises its ADR more than a home with long stays.

RevPAR: revenue per night you had to sell

RevPAR is the revenue a home earned for every night it was available, booked or not.

The term comes from hotels, where it stands for revenue per available room. Wikipedia's entry describes it as "a performance metric in the hotel industry" calculated by dividing guestroom revenue by the room count and the number of days in the period. A whole-home vacation rental is one unit, so the "room" is the home and the measure becomes revenue per available night:

RevPAR = rental revenue ÷ available nights

Because revenue is ADR times booked nights, and occupancy is booked nights divided by available nights, you get a second formula:

RevPAR = ADR × occupancy

Both give the same answer. The first is easier when you have totals; the second is easier when you have a data report that shows ADR and occupancy but not raw nights.

MetricFormulaWhat it tells youWhat it misses
OccupancyBooked nights ÷ available nightsHow full the calendar wasWhat guests paid
ADRRevenue ÷ booked nightsWhat a booked night was worthHow many nights went empty
RevPARRevenue ÷ available nights, or ADR × occupancyWhat each sellable night earnedCosts, and differences in home size

A worked example

The clearest way to see why RevPAR matters is to compare two homes that look different on the surface.

Example, JuneHome AHome B
Available nights3030
Booked nights2721
Occupancy90%70%
ADR$300$420
Revenue$8,100$8,820
RevPAR$270$294

On occupancy alone, Home A looks like the winner. On ADR alone, Home B does. RevPAR settles it: Home B earned more for each night it had to sell. Home B also had six fewer turnovers' worth of nights, which usually means less cleaning, less wear and fewer guest check-ins, though it may have collected fewer cleaning fees too.

The example does not mean higher prices always win. If Home B pushed its rate to $520 and booked only 12 nights, its revenue would be $6,240 and its RevPAR $208, below Home A. RevPAR rewards the right balance, not the highest rate.

A vacation home bedroom made up for guests with fresh towels folded on the bed
Every night a room like this sits ready counts as available, whether or not a guest books it.

Why RevPAR beats occupancy alone

RevPAR is the better headline number because occupancy can be bought with price cuts and ADR can be bought with empty nights, while RevPAR only rises when the combination earns more.

Occupancy is popular because it is easy to understand, and a full calendar feels like success. But it says nothing about what those nights were worth. A host who drops rates until every night books will post high occupancy and may still earn less than a neighbor who holds rates and accepts some empty weeknights.

Key Data, which supplies data to property managers, makes a related point about occupancy itself: "Increasing the paid occupancy rate, if nightly prices are held steady, will lead to higher revenues." The phrase "if nightly prices are held steady" is the catch. Occupancy only tracks revenue when the rate does not move, and in real pricing it almost always moves.

ADR has the opposite blind spot. It is easy to raise ADR by refusing cheaper bookings, and the calendar empties without the ADR figure showing any harm.

RevPAR fixes both, but it has limits of its own:

  • It ignores costs. Two homes with the same RevPAR can have very different cleaning, utility and wear costs if one turns over twice as often.
  • It ignores size. A 7-bedroom home should earn more per night than a 3-bedroom one. Compare RevPAR within a size band, or divide by bedrooms for a rough cross-size check.
  • It depends on the period. Wikipedia's entry notes RevPAR is best compared across "like time periods" and "similar seasonal time periods." June RevPAR against January RevPAR tells you about seasons, not performance.

Get the definitions straight before you compare

Most mistakes with ADR and RevPAR come from comparing numbers that were calculated differently, not from the math.

Three choices change the figures:

What counts as revenue. AirDNA's market revenue is "the sum of nightly rates and cleaning fees minus host discounts and OTA service fees." Your own books may record payouts after the host fee, or gross booking value before it. Neither is wrong, but they produce different ADRs.

What counts as available. AirDNA's occupancy help page says an active listing night "is a night that is not blocked and is either reserved or available," so blocked nights are left out of the denominator. If you block two weeks for your own use and count them as available anyway, your occupancy and RevPAR drop. Key Data lists several occupancy versions, from "paid occupancy" (guest nights ÷ total nights) to "adjusted paid occupancy" (guest nights ÷ total nights minus owner and hold nights), and each one gives a different RevPAR.

What period you use. AirDNA's ADR uses the past 12 months. A single strong month is not an annual ADR.

ChoiceOption 1Option 2Effect if you mix them
Cleaning feesIncluded in revenueLeft outADR and RevPAR shift, more for short-stay homes
Platform feesGross booking valuePayout after feesYour figures look lower than data reports
Blocked nightsLeft out of availableCounted as availableOccupancy and RevPAR fall
PeriodTrailing 12 monthsOne month or seasonSeasonal swings look like performance

When you compare your home to a market report or a seller's numbers, write down which option each one uses and adjust before you draw conclusions.

How investors use ADR and RevPAR

For an investor, ADR and RevPAR are mostly tools for checking whether a projection is realistic.

  • Check the seller's story. If a listing claims high revenue, split it into ADR and occupancy. A very high ADR with average occupancy may depend on a few event weekends that will not repeat.
  • Benchmark against comparable homes. Compare RevPAR with homes of the same size and type, over the same months, using the same definitions.
  • Spot pricing problems. A home with high occupancy and below-market RevPAR is often underpriced. One with low occupancy and high ADR may be overpriced or poorly ranked.
  • Feed the model. Once you have a monthly ADR and occupancy you trust, you have monthly revenue. Our vacation rental income calculator and the other investor tools take those inputs and add costs and financing.

Remember that RevPAR is a revenue measure. A deal is judged on what is left after fees, cleaning, management, insurance, taxes and the loan, so treat RevPAR as the start of the analysis, not the answer.

This is general information, not tax, legal or investment advice.

The bottom line

ADR is revenue per booked night, and RevPAR is revenue per available night, which equals ADR times occupancy. RevPAR is the better single measure because it rewards the mix of rate and nights that actually earns the most, while occupancy and ADR can each look good on their own when revenue is weak. Agree on the definitions first, compare like homes over like months, and then use the figures to test a projection in the investor tools.

Frequently asked questions

What is ADR for a vacation rental?

ADR, or average daily rate, is total rental revenue divided by the number of booked nights. AirDNA defines it as the average revenue earned per booked night, and its figures include the host's cleaning fee but not Airbnb service fees.

What is RevPAR for a vacation rental?

RevPAR is revenue per available room, a hotel metric. For a whole-home rental it means revenue per available night: total rental revenue divided by the nights the home was open to book. It also equals ADR times occupancy.

Why is RevPAR better than occupancy?

Occupancy counts booked nights but ignores price, so a home can be full and still earn less than a neighbor that books fewer nights at a higher rate. RevPAR combines both, so it shows which pricing strategy actually earned more per night you had to sell.

Should cleaning fees be included in ADR?

Either way can work if you are consistent. AirDNA includes the host's cleaning fee in ADR and revenue. If your comparison data includes cleaning fees and your own numbers do not, your ADR will look too low.

Do owner stays count as available nights?

It depends on the source. AirDNA leaves blocked nights out of the available count, so they do not lower occupancy or RevPAR. If you count them as available, both figures drop. Pick one definition and use it for every home you compare.

Is a higher ADR always better?

No. A higher rate that costs too many booked nights lowers RevPAR and total revenue. ADR is one half of the picture; read it next to occupancy and RevPAR.

Sources

  1. AirDNA Help Center: How does AirDNA calculate average daily rate (ADR)?
  2. AirDNA Help Center: How does AirDNA calculate occupancy rate?
  3. AirDNA Help Center: How does AirDNA calculate revenue?
  4. Wikipedia: RevPAR
  5. Key Data: Short-term rental occupancy metrics

Invest in large group homes

Accredited investors can register for future JekkyStay opportunities.